EPOWER Multi-functional Auto Car Jump Starter and Portable External Battery Charger for iPad,Laptop,Mobile Phone,5V 12V 19V Output and Built-In LED Flashligt with Three LED Lights 12800mAh 400A

CAUTIONS:

To avoid cause accidents, make sure note the following cautions:

1. Take off the main unit within 30 seconds after starting the car.

2. Don’t clip the two terminals at the same end on the battery.

3. Don’t Disassemble the unit!

AUTO Emergency Start Power Product Highlights:

* The smallest and lightest portable power with patented technology in the current market.

* Use high capacity high power polymer cells, fast charging and low self-discharge, cycles can reach 1000 times.

* Support 12V car for emergency start, portable illumination and various mobile phone, PSP, MP3/MP4.

* Pocket PC PDA, notebook as well as other products charge / power supply.

* Multiple safety protection design to ensure the product has zero defect.

AUTO Emergency Start Power Instructions for use:

1, Select the appropriate voltage and connector for the electronic device to charge / power supply

2, Press the switch to start charging when your device connected with EPOWER; If you unplug the cable, auto-sleep will start in one minute.

3, Five lights will flash circularly during the charging by EPOWER and all lights will keep bright when your device is full-charged.

4, During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER. Four lights indicate 80% balance, three lights indicate

60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is empty when all LED lights start to flash.

5, Press the switch five seconds to start If you want to use LED for illumination and select the status ( light, strobe, SOS, close) by pressing the switch to transform.

6, Store the product in a cool and dry place and away direct sunlight.

AUTO Emergency Start Power Special note:

To start 12V car, please make sure at least two LED lights of EPOWER are bright firstly, then connect the red battery clip to the battery positive (+) and black clip to

the battery negative (-) and insert the plug into the EPOWER, finally turn the ignition switch to the START position. Once the car is started, please disconnect the

plug and remove the battery clips immediately.

AUTO Emergency Start Power Product parameter:

Output voltage at auto start end 12V

Dimension: 165*79*40mm

Capacity: 12800mAh

Output for vehicle: 12V

USB output: 5V/2A

Input: CC/CV 15V/1A

Start current: 200A

Peak current: 400A

Battery life: 3000 times

Operating temperature: 0~85 C

1. LED illumination light

2. 19V voltage output indicator light

3. 16V voltage output indicator light

4. 12V voltage output indicator light

5. 12/16/19V—2A/3A/3.5A outlet

6. Electrical quantity indicator light

7. Key switch

8. USB 5V— 2A outlet

9. 15V— 1A charge inlet

10. Master switch

11. 12V— 200A auto start outlet

Correct operation flow for auto start:

Packing List:

1. Mobile power * 1pcs

2. Cell phone adapter cable * 1pcs

3. The notebook adapter cable * 1pcs

4. The notebook interface * 8pcs

5. 220 v Charger * 1pcs

6. Car charger * 1pcs

7. Battery clip * 1pcs

8. SuperOBD bag *1pcs